Enhancing CO2 Electroreduction to Methane with a Cobalt Phthalocyanine and Zinc–Nitrogen–Carbon Tandem Catalyst

Developing copper-free catalysts for CO₂ conversion into hydrocarbons and oxygenates is highly desirable for electrochemical CO₂ reduction reaction (CO₂RR). Herein, we report a cobalt phthalocyanine (CoPc) and zinc–nitrogen–carbon (Zn-N-C) tandem catalyst for CO₂RR to CH₄. This tandem catalyst shows a more than 100 times enhancement of the CH₄/CO production rate ratio compared with CoPc or Zn-N-C alone. Density functional theory (DFT) calculations and electrochemical CO reduction reaction results suggest that CO₂ is first reduced into CO over CoPc and then CO diffuses onto Zn-N-C for further conversion into CH₄ over Zn-N₄ site, decoupling complicated CO₂RR pathway on single active site into a two-step tandem reaction. Moreover, mechanistic analysis indicates that CoPc not only generates CO but also enhances the availability of *H over adjacent N sites in Zn-N₄, which is the key to achieve the high CH₄ production rate and understand the intriguing electrocatalytic behavior which is distinctive to copper-based tandem catalysts.     

基于葡萄糖和苯硼酸基元之间的可逆共价键构筑多重响应性高分子复合物胶束

通过可逆加成-断裂链转移(RAFT)的聚合方法,合成了分别含有苯硼酸基元和葡萄糖基元的聚(N-异丙基丙烯酰胺)-b-聚(丙烯酰胺基苯硼酸)(PNIPAM-b-PAPBA)和聚(N-异丙基丙烯酰胺)-b-聚(丙烯酰葡萄糖胺)(PNIPAM-b-PAGA)二嵌段聚合物.由于苯硼酸和葡萄糖基元之间在弱碱性条件下(pH9.3)形成硼酸酯共价键,两种二嵌段聚合物的水溶液混合后能自发形成以PAPBA/PAGA络合物为核,PNIPAM为壳层的高分子复合物胶束.由于硼酸酯共价键在pH值和葡萄糖浓度改变时能可逆形成和断裂,以及胶束PNIPAM壳层的温敏性,所制备的基于苯硼酸/葡萄糖可逆共价键的高分子复合物胶束对pH、葡萄糖和温度具有多重响应性.     

La0.4Ca0.6Mn1-xCrxO3（x=0.00,0.08）的磁电性质研究

用固相反应法制备了La0.4Ca0.6Mn1-xCrxO3（x=0.00,0.08）多晶样品,通过XRD谱、M-T曲线、ρ~T曲线、Lnρ-T-14曲线,研究Cr^3＋替代Mn3＋对La0.4Ca0.6MnO3电荷有序相及电输运性质的影响.实验结果表明：Cr^3＋替代Mn3＋对La0.4Ca0.6MnO3电荷有序相影响...     

Photodegradation of Rhodamine B over unexcited semiconductor compounds of BiOCl and BiOBr

This study reported, for the first time systematically, photodegradation of Rhodamine B (RhB) in aqueous solution over BiOCl and BiOBr semiconductors. Under visible light irradiation (λ>400 nm, λ>420 nm and λ=550±15 nm), RhB adsorbed on the surface of BiOCl and BiOBr was photosensitized and decomposed effectively over unexcited BiOCl and BiOBr. The degradation of Methyl Orange (MO) and Methylene Blue (MB) over BiOCl and BiOBr was investigated as well, and the results were compared with RhB photodegradation. It was found that MB molecules having the lowest LUMO could not be degraded by this process. Utilizing the quantum chemical calculation (Gaussian 03 program), the relationship between frontier orbital energy of selected dye molecules and photodegradation rate was established for the first time in this study.     

Spread spectrum communication and its circuit implementation using fractional-order chaotic system via a single driving variable

A one-driving-variable adaptive controller for synchronization of a kind of fractional order chaotic system is designed. Based on the theory of spread spectrum communication and the synchronization of one-driving-variable fractional order chaotic system, we propose a new scheme for general spread spectrum communication. Numerical simulation and circuit experiment results are provided to illustrate the effectiveness of the proposed scheme.     

与给定多边形相切的C~2四次广义Ball闭曲线

1引言1983年Hering首次提出与给定多边形相切的分段光滑闭曲线构造问题,并给出了其应用背景.此外,在服装CAD纸样的设计过程中,通常先根据尺寸要求确定控制点,再根据控制点用直线段绘制样片的大体轮廓,即控制多边形,然后在控制多边形内用直线和曲线绘制封闭的图形.由于样片的形状不规则,因此构成样片的曲线比较复杂,为了使曲     

Numerical Simulation of Explosive Dust Detonation with CE/SE Method

采用CE/SE方法数值模拟悬浮在空气中的RDX炸药粉尘的两相爆轰过程.炸药颗粒在爆轰波阵面后的高温高速气流中加速并升温,释放能量支持爆轰波传播.数值模拟爆轰波管中的粉尘爆轰,得到爆轰波流场中的物理量分布,确定爆轰参数,数值结果与文献符合较好.数值模拟复杂通道中的炸药粉尘爆轰,预测了爆轰波的发展和传播过程以及爆轰波后的流场演化.数值结果表明CE/SE方法能成功模拟气体-固体两相爆轰,为粉尘爆轰的研究提供了新的数值预测手段.     

ITER电流引线高温超导叠制作工艺及性能测试

ITER高温超导电流引线载流能力最大要达到68 kA,一根电流引线共需要1000多根银金基Bi-2223高温超导带并联.这些高温超导带分成90叠,每叠由12层带组成.银金基Bi-2223带价格是普通银基Bi系带的4～5倍,而目前欧洲超导公司提供的超导叠的报价几乎是其带价格加倍,所以开发超导叠的制作工艺是非常有价值的.本文详细的介绍了超导叠的真空钎焊制作工艺,并进行了77 K下超导带的接头电阻测试和77 K自场下的临界电流测试,以及模拟在实际运行温度65～5 K条件下高温超导叠的载流能力测试和接头电阻的测试.测试结果证明了此工艺的可行性.     

传导冷却磁分离用高温超导磁体的杜瓦设计

随着环境污染的加重,具有高梯度磁场的高温超导磁分离系统作为一种新型高效便捷的污水处理系统得到发展和应用.本文主要介绍了制冷机传导冷却高温超导磁体的便于装卸杜瓦的设计,利用ANSYS软件分析了杜瓦的应力和形变,分析了漏热、温度分布和对磁体的冷却情况,使高温超导磁体在磁分离系统中满足要求并保持正常运行.     

La_(0.5)Sm_(0.2)Sr_(0.3)MnO_3/Ag_x中的室温磁电阻增强

用固相反应法制备La0.5Sm0.2Sr0.3MnO3/(Ag2O)x/2(x=0.00,0.04,0.08,0.25,0.30)样品,通过M～T曲线,ρ～T曲线,ρ～T拟合曲线,研究样品的磁性质、输运行为、输运机制及磁电阻效应.结果表明:少量掺杂时Ag可能参与反应.掺杂量较多时,Ag主要以金属态分离到母体颗粒的界面处,使体系形成两相复合体.少量的Ag掺杂可以明显提高自旋相关散射产生的晶界磁电阻.掺Ag为30%摩尔比时,样品的电阻率较低掺杂样品的电阻率降低一个数量级,在300K、0.5T磁场下,磁电阻明显增强,达到9.4%,这与颗粒母体界面结构的改善有关,也与材料电阻率的降低有关.